Solve your clogged sewers troubles
Solve your clogged sewers troubles
Unfortunately, most of us have experienced being in the shower with the water level rising rapidly. Yuck! A stopped drain. Imagine you are brushing your teeth and you notice that the sink is already half filled with water, Yuck!. Everyone hates obstructed drains because they not only create problems but are also unhygienic and can create a mess. However, most household bathrooms will experience a obstructed drain pipe at some time and one time or another. The best course of action for you is to be prepared to deal with it by learning how to unclog bathroom drains.
First, let’s look at why drains become obstructed and what are the main causes of a blockage.
blocked drains can occur when some material such as hair, dust and particles become trapped in the area between your bathroom drain and the drainage pipes that follow underneath. The problem gets worse when the particle build up is cemented together by the residues of detergents and cleansing cosmetic items. Eventually the clumps of accumulated matter prevent water from emptying out quickly or may even completely seal the drain hole. If you notice water getting accumulated in your tub or sink, you definitely have blocked drains.
Some effective ways to unblock your bathroom drainpipe are listed below.
If you’re facing a stopped bathroom sink or bath drain pipe problem, there are a couple of different things you can do to get things flowing smoothly again. The first thing you will have to do is take out the plug of the blocked sink or drainpipe. You can easily remove the stopper by pulling it off from the bathroom sink, however if it’s fixed under the sink then you need to unscrew the nuts. In case of bath drain, you can either remove the overflow plate or unscrew the stopper.
You may be able to see the clog clearly after the stopper has been taken out. It will most certainly appear like a collection of hair and other particles covered with slimy material inside the drain’s piping. Clear out as much of the stoppage as possible. If the debris is further down than your hand can reach, push in a bent wire or coat hanger and coax the clumps out. There is a good chance that by removing this mass of material the problem will be rectified and your water will flow smoothly.
If you need to disassemble the drainpipe and notice that the clog is not even within reach of a wire hanger, you will have to try another method. Use a drain plunger to loosen the blockage that is deeper down the pipework. To begin with, you should plug the overspill drain to make sure that the plunger has optimum suction. Then put the plunger over the drain mouth and press it up and down repeatedly. When you finally release the plunger, any trapped water should immediately be drained.
However, if this method also fails to have any affect you might have to use some sort of chemical cleaner. Chemical Substances should be applied only after all else fails because they are unsafe and can damage your bathroom hardware.
Call in the drains Professionals.
If the above methods fail to solve your plugged drain problem then you may have to contact a plumber. Professional plumbers will have specialist equipment and know-how to unblock your drain in next to no time. It may cost you, but you will find it is worth the money once you can use your sink and shower worry free.